RF Power Meter

The RF Power Meter presented is based on the AD8313 Log Detector manufactured by Analog Devices. The IC can be ordered as a sample direct from ADI, or you can search for it in some disabled GSM mobile phones available on the market. In GSM phones AD8313 is used as a Log Detector, part of the Power Control Loop circuit. Generally could be easy identified near the Power Amplifier module.AD8313 is a Logarithmic Detector which can accurately convert an RF signal at its input to an equivale [...]

10/06/2008 | The Broadcast Electronic | Tecnologia | rf power meter

Postagens Relacionadas

RF Power Meter Reading by Digital Voltmeter

The RF Power Meter circuit is based on the AD8313 Log Detector manufactured by Analog Devices. In GSM phones AD8313 is used as a Log Detector, part of the Power Control Loop circuit. Generally could be easy identified near the Power Amplifier module. AD8313 is a Logarithmic Detector which can accurately convert an RF signal at its input to an equivalent decibel-scaled value at its DC output. The DC output is “linear in dB” with a basic slope of 20mV/dB. The slope can be adjusted in a r [...]

10/06/2008 | Radio Frequency Circuits Resource For Transmitter Hobbies | rf power meter

LED Power Meter Using Digital Multimeter

LED power Meter circuit is a simple RF detector using diodes to charge a capacitor. The voltage developed across the capacitor is indicated by a multimeter set to a low voltage range. The circuit is soldered together without the need for a PC board, as can be seen in the diagram below and paper clips are used for the positive and negative terminals of the multimeter. The level power output of an FM transmitter is indicated by the illumination of a LED and the voltage reading on the mul [...]

10/06/2008 | Cool Electronic Circuits Looking for ELECTRONIC CIRCUITS Yes IT S ALL HERE! | circuit

LED RF Signal Meter

This is a high quality RF signal meter based around the Analog Devices AD8313 0.1 GHz - 2.5 GHz logarithmic detector IC. It is capable of detecting signals as low as -80 dBm. When combined with 2.4 GHz or 915 MHz bandpass filters, it makes a quick visual reference to the amount of noise in the ISM bands in that particular location. It also makes a handy visual tool for verifying that your antenna is indeed radiating energy. Source: LED RF Signal Meter

10/06/2008 | Test Equipment and Measurement Resource For Test and Measurement Equipment | rf signal

Transistorized Dip Meter

This dip meters use 2SC2369 transistor for RF Oscillator and 2SC458 for AM Tone Oscillator. VR 10 K potentiometer is a linear type it adjust the working voltage of the RF oscillator part from 0~9 Volt DC, it influence the meter reading sensitivity and in the instance the RF power. This Dip meter is a multi-function; it can also be used as a field strength meter and or AM transmission monitor when a headphone replaces the meter. Beside it can be used as a RF signal generator for receive [...]

10/06/2008 | Test Equipment and Measurement Resource For Test and Measurement Equipment | dip meter

An Advanced VHF Wattmeter

This homebrew instrument is an RF power meter project.It presented a simple instrument for the homebrewer to measure RF power well through VHF. There are two meters and more controls that are associated with the instrument’s low-frequency signal processing or “support” circuitry. The reference instrument incorporated a built-in analog meter and provision to connect an external DVM. It also utilized a conversion chart to relate meter readings to RF power. Both digital and analog display [...]

10/06/2008 | Test Equipment and Measurement Resource For Test and Measurement Equipment | rf power